Ready to use factory prepared hemp fibre re-enforced fat lime  external render with mineral aggregates. The material has good coverage, anti-splash and bonding characteristics.

The material is suitable as a finish coat over Hempire Scratch Coat on external surfaces and on Hemp-Limecrete.

Milled and finely screened whole hemp, high calcium lime, mineral aggregates and water supplied as a pre-formulated paste which requires agitation before use.

Applied manually using steel plastering trowel. Spray gun can be used but superior finish achieved manually. Use only clean water without admixtures.
Use an electric hand mixer and mix thoroughly before application.
Can be applied at thicknesses of 3-8 mm.